Saturday, March 27, 2010

The brushless motors are mounted and connected to the speed controllers.

After a few hours spent soldering the connectors in the brushless motors and in the speed controllers, the brushless motors were mounted and connected to the speed controllers.
The next step is to cut the silicone cables and solder the connectors on the ends of each cable and then connect the cables from the four speed controllers to the Lipo battery.

Thursday, March 4, 2010

I already have the speed controllers.

The four speed controllers (BL-Control 818) for the brushless motors are available to be added to the new quadcopter. I have also ordered the plastic screws and nuts to replace the metal screws that are connecting the corners of the quadcopter. I also have ordered a battery monitor that can monitor the battery's voltage status in use and report to me the result with LED and buzzer.